Max Test Pressure: 2.5 MPa
Pressure Precision: Grade 1
Power Supply: 220V / 50Hz
JSMPY-1 Bursting Strength Tester
Max Test Pressure: 2.5 MPa
Pressure Precision: Grade 1
Power Supply: 220V / 50Hz
The JSMPY-1 Bursting Strength Tester is designed for pressure testing and burst inspection of assembled oil filters. It supports a maximum test pressure of 2.5 MPa, Grade 1 pressure precision, and digital pressure result display for routine filter strength verification.
This model helps manufacturers evaluate oil filter shell strength, sealing reliability, and burst pressure performance before delivery. With pressure hold display, PID temperature control, frequency converter flow adjustment, stainless steel piping, and mobile test bench design, it is suitable for automated filter testing applications and quality control inspection.
Filter installation → The assembled oil filter is installed on the test stand according to the required test pressure, filter structure, and inspection method.
Pressure and flow setup → The operator sets the required testing condition, while flow adjustment is controlled by the frequency converter for more flexible test operation.
Temperature control → The PID temperature control system works with heating and cooling devices to help maintain the required testing temperature condition.
Burst pressure testing → The tester pressurizes the filter until failure and displays the burst pressure result for strength and sealing reliability evaluation.
Result checking → The displayed pressure value remains on screen until manual reset, allowing operators to record the burst pressure result for quality control documentation.
| Model | JSMPY-1 |
| Machine Type | Bursting Strength Tester |
| Function | Pressure testing and burst inspection for assembled oil filters |
| Max Test Pressure | 2.5 MPa |
| Pressure Precision | Grade 1 |
| Power Supply | 220V / 50Hz |
| Motor Power | 250 W |
| Machine Weight | 250 kg |
| Machine Size | 800 × 665 × 1585 mm |
The tester pressurizes the oil filter until bursting and displays the pressure result, helping evaluate finished filter strength and sealing reliability.
The burst pressure value remains on the screen until manual reset, making it easier for operators to check, record, and compare test results.
Temperature and pressure difference are shown on the digital display during testing, helping operators monitor key test conditions more clearly.
The temperature control system uses PID adjustment and is equipped with heating and cooling devices to support more stable test conditions.
Flow adjustment is controlled by a frequency converter, allowing operators to set the testing flow condition more flexibly according to different filter test requirements.
The test bench uses aluminum alloy shell, stainless steel panel, seamless stainless steel connecting pipes, bottom oil pan, and casters for practical workshop and laboratory use.
To confirm whether this model fits your oil filter bursting strength testing process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to automated filter testing equipment and also covers the filter bursting strength testing process. You may also compare related machines in the following categories:
Test Flow: 0–25 L/min
Oil Pump Flow: 40 L/min
Temperature Control: Normal Temperature–100°C
Motor Power: 0.75 kW
Power Supply: 220V / 50Hz
Machine Weight: 300 kg
Machine Size: 1000 × 600 × 1560 mm
Product Capability: 0–35 m/min
Width Range: 30–1000 mm
Pleat Height Range: 12–60 mm
Power: 2 kW
Power Supply: 380V / 50Hz
Machine Weight: 300 kg
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success