Max. Media Pleating Width: 1300 mm
Pleat Depth Range: 25–300 mm
Maximum Pleating Speed: 8–10 m/min
Hot Melt Nozzle Pitch: 25.4 mm
Online Slitting Cutters: 5 pcs
JSMRGT-1300 Mini Pleating Machine
Max. Media Pleating Width: 1300 mm
Pleat Depth Range: 25–300 mm
Maximum Pleating Speed: 8–10 m/min
Hot Melt Nozzle Pitch: 25.4 mm
Online Slitting Cutters: 5 pcs
The JSMRGT-1300 Mini Pleating Machine is designed for HEPA filter media pleating and air filter media processing with controlled pleat depth, hot melt spacing, and stable media feeding. It supports a maximum media pleating width of 1300 mm and an adjustable pleat depth range from 25 mm to 300 mm.
This model combines media feeding, servo-driven marking, pleat forming, hot melt dispensing, online slitting, pleat counting, and gathering conveyor in one production process. It is suitable for manufacturers who need a practical HEPA filter pleating machine with flexible adjustment and stable production control.
Media feeding → Filter media is fed into the machine according to the required pleating width, roll setup, and production parameters.
Pleat depth setting → Operators can adjust pleat depth and related production parameters through the touch screen control system.
Marking and pleating → Servo-driven marking rollers and the pleating structure help control media movement and form consistent pleats.
Hot melt dispensing → Hot melt nozzles apply glue at controlled spacing to help stabilize the pleated filter media structure.
Online slitting and gathering → Slitting cutters and the gathering conveyor support continuous media processing and preparation for the next production step.
| Model | JSMRGT-1300 |
| Machine Type | Mini Pleating Machine |
| Max. Media Pleating Width | 1300 mm |
| Pleat Depth Range | 25–300 mm |
| Max. Pleating Speed | 8–10 m/min |
| Hot Melt Nozzle Pitch | 25.4 mm |
| No. of Nozzles | 48 nozzles on each side |
| No. of Slitting Cutters | 5 pcs |
| No. of Pleats per Inch | Max. 7–8 pcs |
| Hot Melt Unit | PHALBOK 60L or Chinese 50L hot melt unit |
| Hose Configuration | 8 hoses, 16 mm, 12 ft |
| Gun Configuration | 8 guns with 12 modules each |
| Max. Operating Temperature | 180–200°C |
| Control System | Touch screen + PLC |
| Drive System | Servo drive / AC variable drive |
| Electrical Components | VEICHI / DELTA |
| Power Supply | 440V, 3 Phase, 50Hz |
| Total Power | 44 kW |
The machine supports media pleating up to 1300 mm wide, making it suitable for wider HEPA filter media and air filter media processing requirements.
Pleat depth can be adjusted through the control system, helping manufacturers switch between different filter specifications with better production flexibility.
The servo-driven marking rollers and gathering system help improve media movement stability, pleat consistency, and continuous production control.
The hot melt system includes dispensing nozzles, heated hoses, guns, modules, and temperature control to help manage glue spacing and filter pack stability.
With 5 online slitting cutters, the machine can support media slitting during pleating, reducing extra handling and preparing the pleated media for the next process.
The touch screen and PLC system support parameter setting, pleat counting, glue spacing control, emergency stop, low-temperature protection, automatic dispensing stop, and roll-end stopping.
To confirm whether this model fits your production line, the following details are usually needed for machine selection or technical recommendation.
Working Width Range: 700–3000 mm
Pleating Height Range: 4–150 mm
Pleating Speed: Up to 400 pleats/min
Max. Media Pleating Width: 700 mm
Pleat Depth Range: 16–100 mm
Maximum Pleating Speed: 8–10 m/min
Hot Melt Nozzle Pitch: 25.4 mm
Online Slitting Cutters: 5 pcs
Max Width: 700 mm
Pleating Height Range: 16–100 mm
Product Speed: 15 m/min
Gluing Interval: 25.4 mm
Power Supply: 380V / 50Hz
Working Air Pressure: 0.6 MPa
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success