Product Capacity: 6 pcs/min
Hot Melt Capacity: 10 kg
Hot Melt Applicator Heat Power: 6 kW
Working Air Pressure: 0.6 MPa
Power Supply: 380V / 50Hz
Machine Weight: 250 kg
JSMRFJ-2 Panel Air Filter Gluing Machine
Product Capacity: 6 pcs/min
Hot Melt Capacity: 10 kg
Hot Melt Applicator Heat Power: 6 kW
Working Air Pressure: 0.6 MPa
Power Supply: 380V / 50Hz
Machine Weight: 250 kg
The JSMRFJ-2 Panel Air Filter Gluing Machine is designed for dispensing hot melt glue lines on passenger car panel air filters. It provides stable hot melt melting, accurate glue output, and consistent glue line application for filter paper bonding and sealing.
This model helps manufacturers improve panel air filter gluing consistency, reduce manual dispensing variation, and support stable passenger car filter production. With a 10 kg hot melt capacity and 6 pcs/min product capacity, it is suitable for panel air filter production lines that require reliable hot melt dispensing performance.
Product positioning → The panel air filter is placed according to the required gluing position, filter size, and production setup.
Hot melt preparation → The hot melt applicator heats and melts adhesive to a suitable dispensing state for continuous production.
Glue output control → The metering and dispensing system helps control glue output and apply adhesive along the required line or path.
Surface gluing → Hot melt glue lines are dispensed on the panel air filter surface to support filter paper bonding and sealing stability.
Continuous operation → The machine supports stable panel air filter gluing with a product capacity of 6 pcs/min.
| Model | JSMRFJ-2 |
| Machine Type | Panel Air Filter Gluing Machine |
| Product Capacity | 6 pcs/min |
| Hot Melt Capacity | 10 kg |
| Hot Melt Applicator Heat Power | 6 kW |
| Working Air Pressure | 0.6 MPa |
| Main Machine Power | 120 W |
| Power Supply | 380V / 50Hz |
| Machine Weight | 250 kg |
| Machine Size | 2100 × 520 × 1130 mm |
| Hot Melt Applicator Size | 830 × 600 × 1400 mm |
The machine is specially used for dispensing hot melt lines on panel air filter surfaces, helping improve bonding consistency and sealing performance.
The hot melt applicator heats adhesive to a suitable dispensing state, supporting continuous glue supply during panel air filter production.
The metering and dispensing system helps control glue output accurately and apply adhesive along the required path or pattern.
Hot melt adhesive helps bond filter paper firmly and improves filter sealing stability, reducing glue variation caused by manual operation.
With a product capacity of 6 pcs/min, the machine supports stable output for passenger car panel air filter manufacturing.
The main machine and hot melt applicator are arranged for practical workshop use, making the system suitable for panel air filter gluing stations.
To confirm whether this model fits your passenger car panel air filter production process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to passenger car filter production equipment and the filter gluing process. You may also compare related machines in the following categories:
Working Width: 90–320 mm
Pleating Height: 20–58 mm
Production Speed: 5–25 m/min
Temperature Range: 0–300°C
Power Supply: 380V / 50Hz
Working Air Pressure: 0.6 MPa
Overall Output: 5–15 g/s
Mixture Ratio: A:B = 100:25–35
Moving Speed: 2–10 m/min
Overall Power: 8 kW
Power Supply: 380V / 50Hz
Product Specification: 410 × 410 × 110 mm
Running Speed: 0–5 m/min, adjustable
Station Size: 500 × 400 mm
Power Supply: 220V / 50Hz
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success