Working Width: 90–320 mm
Pleating Height: 20–58 mm
Production Speed: 5–25 m/min
Temperature Range: 0–300°C
Power Supply: 380V / 50Hz
Working Air Pressure: 0.6 MPa
JSMRPG-350 PU Panel Air Filter Pleating and Gluing Machine
Working Width: 90–320 mm
Pleating Height: 20–58 mm
Production Speed: 5–25 m/min
Temperature Range: 0–300°C
Power Supply: 380V / 50Hz
Working Air Pressure: 0.6 MPa
The JSMRPG-350 PU Panel Air Filter Pleating and Gluing Machine is designed for pleating and hot melt gluing in passenger car panel air filter production. It supports a working width of 90–320 mm, pleating height of 20–58 mm, and production speed of 5–25 m/min.
This model combines paper decoiling, heating, steam treatment, pleating, hot melt glue dispensing, conveying, and automatic counting in one continuous process. It helps manufacturers improve PU panel air filter pleat consistency, glue application stability, and production efficiency.
Paper decoiling → Filter paper is fed into the machine according to the required working width, pleating height, and production setup.
Heating and steam treatment → The heating and steam system helps prepare the paper for marking and pleating, reducing the risk of paper breakage during production.
Pleating forming → Impression, bubble forming, and pleating are completed through the roller and pleating system to support stable pleat quality.
Hot melt gluing → The glue system applies hot melt adhesive with adjustable glue quantity and stable temperature control.
Conveying and counting → The conveyor system and automatic counter support continuous output and easier production management.
| Model | JSMRPG-350 |
| Machine Type | PU Panel Air Filter Pleating and Gluing Machine |
| Working Width | 90–320 mm |
| Pleating Height | 20–58 mm |
| Production Speed | 5–25 m/min |
| Temperature Range | 0–300°C |
| Heater Power | 8.5 kW |
| Pleater Transmission Power | 0.75 kW |
| Conveyor Belt Transmission Power | 0.25 kW |
| Working Air Pressure | 0.6 MPa |
| Power Supply | 380V / 50Hz |
| Machine Weight | 1100 kg |
| Machine Size | 7500 × 950 × 1750 mm |
The machine integrates paper decoiling, heating, steam treatment, pleating, hot melt gluing, conveying, and automatic counting, reducing separate handling between production steps.
The machine speed and conveyor speed can be adjusted through computer control, helping match different filter paper conditions and production requirements.
Impression and bubble forming are completed on the same pair of rollers, helping improve pleating precision and finished product consistency.
The preset temperature control and water steam device help reduce paper breakage during marking and pleating, supporting smoother production.
The hot melt system melts adhesive quickly, and the glue dispensing quantity can be adjusted through the frequency converter according to production needs.
The rubber hose and nozzle are independently temperature controlled, helping improve gluing stability and daily operation convenience.
To confirm whether this model fits your passenger car panel air filter production process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to passenger car filter production equipment and also covers the filter pleating and hot melt gluing process. You may also compare related machines in the following categories:
Materials Width: ≤ 1000 mm
Production Capacity: 3 m/min
Materials Coil Diameter: ≤ Φ800 mm
Heating Power: 3 kW
Power Supply: 380V / 50Hz
Working Air Pressure: 0.6 MPa
Product Capacity: 6 pcs/min
Hot Melt Capacity: 10 kg
Hot Melt Applicator Heat Power: 6 kW
Working Air Pressure: 0.6 MPa
Power Supply: 380V / 50Hz
Machine Weight: 250 kg
Overall Output: 5–15 g/s
Mixture Ratio: A:B = 100:25–35
Moving Speed: 2–10 m/min
Overall Power: 8 kW
Power Supply: 380V / 50Hz
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success