Available End Cap ID: Φ50–110 mm
Input Capacity: 4 pcs/time
Production Speed: 30–50 pcs/min
JSMRZJ-4 4-Station PVC Caps Gluing Machine
Available End Cap ID: Φ50–110 mm
Input Capacity: 4 pcs/time
Production Speed: 30–50 pcs/min
The JSMRZJ-4 4-Station PVC Caps Gluing Machine is designed for PVC glue dispensing on filter end caps in spin-on oil filter production. It supports available end cap ID from Φ50 mm to Φ110 mm, 4 pcs/time input capacity, and production speed of 30–50 pcs/min.
This model helps manufacturers improve end cap gluing consistency, reduce manual adhesive variation, and support efficient spin-on oil filter assembly. With 4-station processing, computer-controlled operation, accurate pump delivery, and dedicated glue tank design, it is suitable for continuous PVC end cap gluing in oil filter manufacturing lines.
End cap loading → PVC filter end caps are loaded according to the required inner diameter, glue type, and production setup.
4-station positioning → The machine processes up to 4 end caps each time, helping improve gluing efficiency and production rhythm.
PVC glue supply → The glue pump delivers high-viscosity PVC adhesive to the gluing system with stable pressure and controlled output.
End cap gluing → Glue is dispensed evenly on the end cap surface to support later filter element bonding and sealing.
Finished cap output → After gluing, the end caps are prepared for filter element assembly, curing, inspection, or connection with other spin-on oil filter production equipment.
| Model | JSMRZJ-4 |
| Machine Type | 4-Station PVC Caps Gluing Machine |
| Function | PVC glue dispensing for spin-on oil filter end caps |
| Available End Cap ID | Φ50–110 mm |
| Max End Caps Input Number / Time | 4 pcs/time |
| Production Speed | 30–50 pcs/min |
| Glue Viscosity | ≤ 50000 CP |
| Glue Type | PVC high-temp. solidified adhesive |
| Power Supply | 380V / 50Hz |
| Conveyor Motor Power | 120 W + 750 W |
| Working Air Pressure | 0.6 MPa |
| Pump Air Pressure | ≤ 0.45 MPa |
| Machine Weight | 400 kg |
| Machine Size | 1600 × 1600 × 1800 mm |
The machine supports 4-station processing, allowing multiple end caps to be glued each cycle for higher efficiency in spin-on oil filter production.
It is designed for end cap ID from Φ50 mm to Φ110 mm, covering common PVC cap gluing requirements in spin-on oil filter manufacturing.
The machine can work with PVC high-temperature solidified adhesive up to 50000 CP viscosity, supporting stable end cap bonding and sealing processes.
End cap loading and gluing actions can be regulated by computer control, helping coordinate machine movement and improve repeated production stability.
The gluing pump helps deliver adhesive accurately, reducing glue output variation and supporting more consistent gluing quality on end cap surfaces.
The special glue tank configuration helps make glue application more uniform and supports stable daily operation in continuous oil filter production.
To confirm whether this model fits your spin-on oil filter PVC cap gluing process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to spin-on oil filter production equipment and also covers the PVC end cap gluing process. You may also compare related machines in the following categories:
Production Capacity: 25 pcs/min
Motor Power: 0.3 kW
Supply Voltage: 380V / 50Hz
Air Pressure: 0.6 MPa
Machine Weight: 250 kg
Machine Size: 1300 × 800 × 1300 mm
Model: CJTN-100-8 / TN-100-8
Working Stations: 8 stations
Working Speed: 10–40 pcs/min, adjustable
Rated Capacity: 100KVA, adjustable
Max Width: 700 mm
Pleating Height: 3–70 mm
Pleating Speed: 0–400 pleats/min
Gluing Speed: 25 m/min
Gluing Height Range: 8–80 mm
Gluing Lines: 2 × 26
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success