Production Capacity: 0.008 m/s
Max. Cutting Force: Up to 300 kN
Stamping Adjustment Range: 5–60 mm
Board to Workbench Distance: 40–140 mm
JSMRCQ-1 Toyota Air Filter Edge Trimming Machine
Production Capacity: 0.008 m/s
Max. Cutting Force: Up to 300 kN
Stamping Adjustment Range: 5–60 mm
Board to Workbench Distance: 40–140 mm
The JSMRCQ-1 Toyota Air Filter Edge Trimming Machine is designed for edge trimming and stamping in Toyota air filter production. It supports 0.008 m/s production capacity, cutting force up to 300 kN, and 5–60 mm stamping adjustment range for stable edge finishing work.
This model helps manufacturers improve trimming precision, edge consistency, and product finishing quality during automotive air filter manufacturing. With adjustable board-to-workbench distance, 0.75 MPa working air pressure, 50 L liquid oil capacity, and industrial 380V / 50Hz configuration, it is suitable for Toyota air filter edge processing stations.
Air filter component loading → Toyota air filter components are placed into the trimming position according to the required edge structure, product size, and production setup.
Workbench height adjustment → The board-to-workbench distance is adjusted within the 40–140 mm range to match different product processing requirements.
Stamping range setup → The stamping adjustment range is set from 5 mm to 60 mm according to the trimming depth and edge finishing requirement.
Edge trimming and stamping → The machine applies strong cutting force to trim and stamp the air filter edge section with stable processing action.
Finished part output → After trimming, the processed air filter component is prepared for later inspection, assembly, packaging, or other downstream production steps.
| Model | JSMRCQ-1 |
| Machine Type | Toyota Air Filter Edge Trimming Machine |
| Function | Edge trimming and stamping for Toyota air filter production |
| Production Capacity | 0.008 m/s |
| Max. Cutting Force | Up to 300 kN |
| Stamping Adjustment Range | 5–60 mm |
| Board to Workbench Distance | 40–140 mm |
| Motor Power | 120 kW |
| Working Air Pressure | 0.75 MPa |
| Power Supply | 380V / 50Hz |
| Liquid Oil Capacity | 50 L |
| Machine Size | 900 × 1000 × 1400 mm |
The machine is used for trimming and stamping edge sections in Toyota air filter production, helping complete a key finishing step before later inspection or assembly.
With cutting force up to 300 kN, the machine supports strong edge trimming and stamping performance for automotive air filter components.
The 5–60 mm stamping adjustment range allows the machine to adapt to different edge trimming depths and product finishing requirements.
The board-to-workbench distance can be adjusted from 40 mm to 140 mm, making the machine more flexible for different air filter component structures.
The 50 L liquid oil capacity supports stable machine movement and helps maintain reliable trimming performance during repeated production.
With 380V / 50Hz power supply, 0.75 MPa working air pressure, and 900 × 1000 × 1400 mm machine size, this model is suitable for factory air filter production stations.
To confirm whether this model fits your Toyota air filter edge trimming process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to Toyota air filter production equipment and also covers the air filter edge trimming and cutting process. You may also compare related machines in the following categories:
Product Capacity: 70 pcs/hour
Heating Power: 6 kW
Machine Size: 1000 × 1050 × 2500 mm
Product Capacity: 3 pcs/min
Element Width: 380 mm
Element Diameter: 900 mm
Max Width: 800 mm
Adjustable Pleating Height: 8–100 mm
Pleating Speed: 0–200 pleats/min
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success