End Cap Outer Diameter: ≤ 500 mm
Gluing Width: ≤ 50 mm
Production Capability: 4 pcs/min
JSMRPVC-1 PVC Caps Gluing Machine
End Cap Outer Diameter: ≤ 500 mm
Gluing Width: ≤ 50 mm
Production Capability: 4 pcs/min
The JSMRPVC-1 PVC Caps Gluing Machine is designed for dispensing PVC adhesive on heavy-duty air filter end caps in truck filter production. It supports end cap outer diameters up to 500 mm, gluing width up to 50 mm, and stable adhesive application for PVC-capped filter products.
This model helps manufacturers improve end cap gluing consistency, reduce manual adhesive variation, and support continuous truck air filter production. With accurate adhesive supply, double sealing nozzle design, automatic product transfer, and compatibility with high-viscosity PVC filter adhesive, it is suitable for heavy-duty air filter end cap gluing processes.
End cap positioning → The heavy-duty air filter end cap is placed according to the required outer diameter, gluing width, and production setup.
PVC adhesive preparation → PVC filter adhesive is prepared according to the required viscosity, gluing condition, and end cap bonding requirement.
Adhesive dispensing → The gluing pump and gluing head dispense PVC adhesive onto the end cap with controlled pressure and stable output.
Nozzle sealing → The double sealing nozzle design helps stop glue more thoroughly after dispensing, reducing dripping and improving operation cleanliness.
Automatic product transfer → The auto mover pushes glued products into the production line automatically, reducing manual transfer influence on product quality.
| Model | JSMRPVC-1 |
| Machine Type | PVC Caps Gluing Machine |
| Function | PVC adhesive dispensing on heavy-duty air filter end caps |
| End Cap Outer Diameter | ≤ 500 mm |
| Gluing Width | ≤ 50 mm |
| Adhesive Viscosity | ≤ 50000 CP |
| Suitable Adhesive | PVC filter adhesive, high-temperature solidified adhesive |
| Production Capability | 4 pcs/min |
| Power Supply | 220V / 50Hz |
| Main Machine Power | 500 W |
| Working Air Pressure | 0.6 MPa |
| Gluing Pump Air Pressure | ≤ 0.45 MPa |
| Gluing Head Working Pressure | 4 MPa |
| Machine Weight | 300 kg |
| Machine Size | 1405 × 950 × 1300 mm |
The machine is designed for dispensing PVC adhesive on heavy-duty air filter end caps, helping complete a key bonding step in truck filter production.
It supports end cap outer diameters up to 500 mm and gluing widths up to 50 mm, making it suitable for different heavy-duty air filter end cap specifications.
The machine can work with PVC filter adhesive up to 50000 CP viscosity, supporting stable gluing for high-temperature solidified adhesive applications.
The double sealing structure helps the nozzle stop glue more completely after dispensing, reducing glue dripping and improving gluing cleanliness.
The gluing system adopts a precision pump configuration to help improve adhesive supply accuracy and reduce glue output variation during repeated production.
The auto mover system pushes glued products into the production line automatically, helping reduce the quality impact caused by manual transfer after gluing.
To confirm whether this model fits your truck air filter end cap gluing process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to truck filter production equipment and also covers the filter end cap gluing process. You may also compare related machines in the following categories:
Max. Mesh Width: ≤ 1200 mm
Mesh Thickness: 0.3–1 mm
Shaft Speed: 8 circles/min
Seal Speed: 40 pcs/min
Filter Element Diameter: Φ400 mm
Filter Element Length: 1000 mm
Temperature Control: Normal Temperature–300°C
Available Cap Diameter: ≤ Φ450 mm
Gluing Range (Single): 10–260 g
Product Efficiency: 2–6 pcs/min
Mixing Rate: 1:6, customizable
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success