Test Accuracy: 0.01 mm
Test Range: 0.01–4 mm
JSMRHT-1 Handheld Thickness Tester
The JSMRHT-1 Handheld Thickness Tester is designed for measuring the thickness of filter paper, cardboard, and other sheet materials under specified pressure and contact area. It supports 0.01 mm test accuracy, 0.01–4 mm test range, and compact handheld operation for routine material inspection.
This model helps manufacturers check incoming filter media thickness, monitor material consistency, and support daily quality control before pleating, cutting, gluing, or assembly processes. With defined contact force, fixed contact area, and 4 kg net weight, it is suitable for laboratory testing, production inspection, and filter paper quality verification.
Sample preparation → Filter paper, cardboard, or sheet material is prepared according to the required thickness testing method and inspection standard.
Tester positioning → The handheld tester is placed on the sample surface so the contact area can press the material evenly during measurement.
Specified pressure contact → The tester applies measurement under a defined contact force and contact area to help make the test result more standardized.
Thickness reading → The operator reads the measured thickness value within the 0.01–4 mm test range for material inspection or production record keeping.
Quality judgment → The measured thickness is compared with material requirements before the sheet material moves to pleating, slitting, gluing, assembly, or other filter production steps.
| Model | JSMRHT-1 |
| Machine Type | Handheld Thickness Tester |
| Function | Thickness measurement for filter paper, cardboard, and sheet materials |
| Test Accuracy | 0.01 mm |
| Test Range | 0.01–4 mm |
| Contact Force | 100 ± 10 kPa |
| Contact Area | 2 ± 0.05 cm² |
| Net Weight | 4 kg |
The tester is used for measuring the thickness of filter paper, cardboard, and other sheet materials, supporting routine material inspection before filter production.
The 0.01 mm test accuracy helps operators check small thickness differences in filter media and related sheet materials more clearly during quality control.
The tester measures thickness under a defined contact force and contact area, helping reduce random measurement variation caused by different manual pressure habits.
Filter paper thickness affects pleating stability, glue application, cutting quality, and finished filter element consistency, so routine thickness checking is useful before production.
With a net weight of 4 kg, this tester is convenient for laboratory use, quality control stations, material receiving inspection, and daily workshop checking.
The simple testing principle makes it suitable for frequent material checks where operators need quick thickness confirmation without a large testing system.
To confirm whether this model fits your filter material thickness testing process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to automated filter testing equipment and also covers the filter material thickness testing process. You may also compare related machines in the following categories:
Maximum Pressure: 0.2 MPa
Maximum Diameter: Φ100 mm
Maximum Length: 350 mm
Impact Pendulum: 0–16 N / 0–32 N / 0–64 N
Sample Size: 100 × 63 mm
Incision Length: 20 ± 0.5 mm
Fixture Distance: 2.8 ± 0.3 mm
Force Accuracy: ≤ ±1
Machine Size: 400 × 210 × 395 mm
Pore Size Range: 5–150 μm
Pressure Range: 0–20 kPa
Pressure Accuracy: ±1%
Pressure Resolution: 0.01 kPa
Test Piece Thickness: 0.10–3.5 mm
Test Area: 10 ± 0.2 cm²
Power Supply: AC220V
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success