Product Capability: 4 pcs/min
Working Piece Diameter: Φ100 mm
Working Piece Height: 300 mm
JSMRHJ-6 Full-auto Six Stations ECO Filter Caps Welding Machine
Product Capability: 4 pcs/min
Working Piece Diameter: Φ100 mm
Working Piece Height: 300 mm
The JSMRHJ-6 Full-auto Six Stations ECO Filter Caps Welding Machine is designed for welding filter paper and plastic end caps in ECO filter production. It supports 4 pcs/min product capability, Φ100 mm working piece diameter, 300 mm working piece height, and six-station automatic welding operation.
This model helps manufacturers improve end cap bonding consistency, reduce manual welding variation, and support stable ECO filter assembly. With 16 kW heating power, 0.6 MPa working air pressure, firm welding performance, and simple operation, it is suitable for environmentally friendly oil filters, fuel filters, and air filters.
Component preparation → Filter paper and plastic end caps are prepared according to the required ECO filter structure, working piece diameter, and working piece height.
Workpiece positioning → The filter paper and end cap components are positioned in the welding station to keep the joining area aligned before heating and welding.
Six-station circulation → The six-station structure supports continuous automatic processing, helping improve production rhythm during ECO filter cap welding.
Heating and welding → The machine uses heating power to weld the filter paper and plastic end cap together, helping form a firm and stable end cap bond.
Finished part transfer → After welding, the ECO filter component is prepared for later inspection, clipping, marking, heat shrinking, assembly, or other downstream production steps.
| Model | JSMRHJ-6 |
| Machine Type | Full-auto Six Stations ECO Filter Caps Welding Machine |
| Function | Filter paper and plastic end cap welding for ECO filter production |
| Product Capability | 4 pcs/min |
| Working Piece Diameter | Φ100 mm |
| Working Piece Height | 300 mm |
| Heating Power | 16 kW |
| Working Air Pressure | 0.6 MPa |
| Power Supply | 380V / 50Hz |
| Machine Weight | 600 kg |
| Machine Size | 1600 × 1300 × 1545 mm |
The machine is mainly used for welding filter paper and plastic end caps of environmentally friendly oil filters, fuel filters, and air filters.
The six-station design supports continuous automatic production, helping improve process efficiency and reduce repeated manual handling during cap welding.
The machine is designed to create firm welding between filter paper and plastic end caps, supporting better end cap bonding reliability in ECO filter production.
With Φ100 mm working piece diameter and 300 mm working piece height, this model is suitable for defined ECO filter cap welding specifications.
The 16 kW heating power supports the welding process and helps maintain stable joining performance during routine production.
The machine is designed for easy operation in workshop production, making it practical for ECO filter manufacturers that need a dedicated cap welding station.
To confirm whether this model fits your ECO filter cap welding process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to ECO filter production equipment and also covers the ECO filter cap welding and sealing process. You may also compare related machines in the following categories:
Power: 2 kW
Power Supply: 380V / 50Hz
Machine Weight: 300 kg
Production Capacity: 15 pcs/min
Filter Height: ≤280 mm
Hot Melt Capacity: 10 kg
Laser Wavelength: 1064 nm
Laser Power: 20 W
Marking Range: 110 × 110 mm – 300 × 300 mm
Marking Speed: ≤18000 mm/s
Repeatability Precision: ±0.001 mm
Minimum Character: 0.05 mm
Laser Module Life: 100000 hours
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success