Laser Wavelength: 1064 nm
Laser Power: 20 W
Marking Range: 110 × 110 mm – 300 × 300 mm
Marking Speed: ≤18000 mm/s
Repeatability Precision: ±0.001 mm
Minimum Character: 0.05 mm
Laser Module Life: 100000 hours
The LASER-1 Plastic Caps Laser Marking Machine is designed for high-precision laser marking on plastic caps used in ECO filter production. It supports 1064 nm laser wavelength, 20 W laser power, marking range from 110 × 110 mm to 300 × 300 mm, and marking speed up to 18000 mm/s.
This model helps manufacturers create permanent product information, logos, codes, and identification marks on plastic filter components. With non-contact laser marking, fine spot quality, ±0.001 mm repeatability precision, and long laser module life, it is suitable for stable marking work in ECO filter manufacturing lines.
Plastic cap positioning → Plastic caps are placed in the marking position according to the required marking area, product shape, and ECO filter production setup.
Marking file setup → Product information, logo, code, batch number, or other identification content is prepared in the laser marking system.
Laser focus adjustment → The laser focus and marking range are adjusted according to the plastic cap size and required marking position.
Non-contact laser marking → The 1064 nm laser marks the plastic cap surface without mechanical contact, helping maintain component shape and surface stability.
Finished cap output → After marking, the plastic cap is prepared for later assembly, heat shrinking, inspection, packaging, or other ECO filter production steps.
| Model | LASER-1 |
| Machine Type | Plastic Caps Laser Marking Machine |
| Function | Permanent laser marking on plastic caps for ECO filter production |
| Laser Wavelength | 1064 nm |
| Laser Power | 20 W |
| Laser Repetition Frequency | 0–100 kHz |
| Power Regulation Range | 0–100% |
| Output Beam Quality | M2＜1.2 |
| Minimum Focus Spot Diameter | 0.005 mm |
| Marking Speed | ≤18000 mm/s |
| Repeatability Precision | ±0.001 mm |
| Curved Line Depth | ≤0.5 mm |
| Minimum Character | 0.05 mm |
| Marking Range | 110 × 110 mm – 300 × 300 mm |
| Laser Module Life | 100000 hours |
| Cooling Mode | Air cooling, high-precision constant temperature / closed loop |
| Power Supply | 220V ±22V / 50Hz / 12A |
| Machine Power | 400 W |
| Machine Size | 750 × 850 × 1500 mm |
| Machine Weight | 130 kg |
The machine is used for permanent identification marking on plastic caps and similar ECO filter components, helping improve product traceability and finished appearance.
With marking speed up to 18000 mm/s, this model supports efficient marking work for continuous ECO filter component production.
The ±0.001 mm repeatability precision and 0.05 mm minimum character size help produce clear logos, codes, and identification information on plastic cap surfaces.
The marking range from 110 × 110 mm to 300 × 300 mm allows the machine to adapt to different plastic cap sizes and marking layout requirements.
Air cooling with high-precision constant temperature closed-loop control supports stable operation during repeated marking work.
The laser module life reaches 100000 hours, making the machine suitable for long-term industrial marking applications in ECO filter production lines.
To confirm whether this model fits your ECO filter plastic cap marking process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to ECO filter production equipment and is mainly used for permanent laser marking on plastic caps in ECO filter manufacturing. You may also compare related machines in the following category:
Production Capacity: 15 pcs/min
Filter Height: ≤280 mm
Hot Melt Capacity: 10 kg
Production Capacity: 2 pcs/min
Filter Height: ≤280 mm
Filter Diameter: ≤130 mm
Product Capacity: 70 pcs/hour
Heating Power: 6 kW
Machine Size: 1000 × 1050 × 2500 mm
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success
