Production Capacity: 2 pcs/min
Filter Height: ≤280 mm
Filter Diameter: ≤130 mm
PVC-8 PVC Film Heat Shrink Machine
Production Capacity: 2 pcs/min
Filter Height: ≤280 mm
Filter Diameter: ≤130 mm
The PVC-8 PVC Film Heat Shrink Machine is designed for heat shrinking PVC film on ECO oil filter elements. It supports 2 pcs/min production capacity, filter height up to 280 mm, filter diameter up to 130 mm, and mold heating film bonding for both ends of the filter element.
This model helps manufacturers improve PVC film sealing consistency, product appearance, and end protection in ECO filter production. With heating, constant temperature, delay, cooling, and height adjustment functions, it is suitable for environmentally friendly filter element heat shrink processing and final production preparation.
Filter element loading → ECO oil filter elements are loaded according to the required filter height, filter diameter, PVC film position, and production setup.
PVC film positioning → The heat-shrink film is placed around the required end area to prepare for bonding and shrinking.
Mold heating → The machine uses mold heating to bond the heat-shrink film to both ends of the filter element.
Temperature and cooling control → Heating, constant temperature, delay, and cooling functions support stable shrinking and reduce processing variation.
Finished filter output → After heat shrinking, the ECO filter element is prepared for later inspection, packaging, storage, or shipment.
| Model | PVC-8 |
| Machine Type | PVC Film Heat Shrink Machine |
| Function | PVC film heat shrinking and end bonding for ECO oil filter elements |
| Production Capacity | 2 pcs/min |
| Filter Height | ≤280 mm |
| Filter Diameter | ≤130 mm |
| Air Pressure | 0.15–0.3 MPa |
| Heating Power | 4 kW |
| Power Supply | 380V / 50Hz |
| Machine Weight | 200 kg |
| Machine Size | 1320 × 650 × 1600 mm |
The machine is mainly used for PVC film heat shrinking on environmentally friendly oil filter elements, supporting a finishing step in ECO filter production.
The heat-shrink film is bonded to both ends of the filter element through mold heating, helping improve end sealing and appearance consistency.
Heating, constant temperature, delay, and cooling functions help keep the shrinking process more stable during repeated production.
The machine supports height adjustment, making it more practical for different ECO filter element sizes within the supported product range.
With 4 kW heating power, 200 kg machine weight, and 1320 × 650 × 1600 mm machine size, this model is suitable for arranging as a dedicated heat shrink station.
The equipment is suitable for PVC film shrinking or blowing applications in environmentally friendly filter production, especially where end protection and appearance consistency are required.
To confirm whether this model fits your ECO filter PVC film heat shrink process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to ECO filter production equipment and also covers the PVC film heat shrink process before final packaging or delivery. You may also compare related machines in the following categories:
Laser Wavelength: 1064 nm
Laser Power: 20 W
Marking Range: 110 × 110 mm – 300 × 300 mm
Marking Speed: ≤18000 mm/s
Repeatability Precision: ±0.001 mm
Minimum Character: 0.05 mm
Laser Module Life: 100000 hours
Product Capacity: 70 pcs/hour
Heating Power: 6 kW
Machine Size: 1000 × 1050 × 2500 mm
Production Capacity: 0.008 m/s
Max. Cutting Force: Up to 300 kN
Stamping Adjustment Range: 5–60 mm
Board to Workbench Distance: 40–140 mm
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success