Model: JSMRZK-800
Capacity: 8–10 pcs/min
Glue Output: Adjustable
Motor Power: 2 kW
Power Supply: AC 220V
Hot Melt Tank Capacity: 10 L
Gluing Hose Length: 3 m
Max. Gluing Size: 800 × 800 × 100 mm
JSMRZK-800 Air Filter Frame Gluing Machine
Model: JSMRZK-800
Capacity: 8–10 pcs/min
Glue Output: Adjustable
Motor Power: 2 kW
Power Supply: AC 220V
Hot Melt Tank Capacity: 10 L
Gluing Hose Length: 3 m
Max. Gluing Size: 800 × 800 × 100 mm
The JSMRZK-800 Air Filter Frame Gluing Machine is designed for glue application on HEPA filter frames and air filter frames. It supports adjustable glue output, stable dispensing control, and a maximum gluing size of 800 × 800 × 100 mm.
This model helps manufacturers improve frame bonding consistency, reduce manual glue variation, and support continuous HEPA filter frame gluing. With a compact hot melt system and flexible gluing operation, it is suitable for filter frame sealing and bonding processes that require stable glue output.
Frame positioning → The HEPA filter frame is placed according to the required gluing size, frame structure, and production setup.
Glue preparation → The hot melt tank heats and prepares the adhesive for stable glue dispensing during production.
Glue output adjustment → Operators can adjust glue output according to different frame sizes, glue amount requirements, and sealing needs.
Frame gluing → The machine applies glue along the required frame path to support bonding, sealing, and assembly consistency.
Continuous production → A capacity of 8–10 pcs/min supports stable filter frame gluing and helps reduce manual operation variation.
| Model | JSMRZK-800 |
| Machine Type | Air Filter Frame Gluing Machine |
| Capacity | 8–10 pcs/min |
| Glue Output | Adjustable |
| Motor Power | 2 kW |
| Power Supply | AC 220V |
| Hot Melt Tank Capacity | 10 L |
| Gluing Hose Length | 3 m |
| Max. Gluing Size | 800 × 800 × 100 mm |
The machine is used for glue application on HEPA filter frames, helping improve frame sealing consistency and bonding quality during filter assembly.
The glue amount can be adjusted according to different filter frame sizes, bonding requirements, and glue application needs.
Stable glue output helps reduce glue dripping, leaking, and uneven manual application, supporting more consistent frame bonding quality.
The machine supports a maximum gluing size of 800 × 800 × 100 mm, making it suitable for different HEPA filter frame structures within its working range.
The 10 L hot melt tank and 3 m gluing hose provide practical adhesive supply for filter frame gluing and sealing operations.
The machine can be adjusted or customized according to different frame structures, gluing paths, and production process requirements.
To confirm whether this model fits your HEPA filter frame production process, the following details are usually needed for machine selection or technical recommendation.
This model is used for HEPA filter frame gluing and belongs to the filter gluing process. You may also compare related machines in the following categories:
Max. Width: 350 mm
Max. Coil Diameter: 1000 mm
Production Speed: 20 sheets/min or 6 m/min (based on 500 mm length)
Motor Power: 0.75 kW
Power Supply: 380V / 50Hz
Working Air Pressure: 0.6 MPa
Capacity: 8–10 pcs/min
Motor Power: 2 kW
Power Supply: AC 220V
Cutting Size: Depends on mold
Available Cap Diameter: ≤ Φ450 mm
Gluing Range: 10–260 g
Production Efficiency: 2–6 pcs/min
Mixing Ratio: 1:6, customizable
Machine Power: 4 kW
Working Air Pressure: 0.6 MPa
Power Supply: 380V / 50Hz
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success