Capacity: 8–10 pcs/min
Motor Power: 2 kW
Power Supply: AC 220V
Cutting Size: Depends on mold
JSMRCT-1 Air Filter Round Cutting Machine
Capacity: 8–10 pcs/min
Motor Power: 2 kW
Power Supply: AC 220V
Cutting Size: Depends on mold
The JSMRCT-1 Air Filter Round Cutting Machine is designed for round corner cutting and corner processing in air filter production. It supports double-corner cutting, adjustable cutting molds, and stable pneumatic operation for different filter frame or filter part requirements.
This model helps manufacturers improve corner cutting consistency, reduce manual trimming variation, and process round corners according to mold requirements. With a compact structure and practical safety protection, it is suitable for filter production steps that require stable and repeatable corner cutting.
Product positioning → The filter frame or filter part is placed according to the required corner position and cutting mold setup.
Mold adjustment → The cutting mold is adjusted or changed according to the required round corner size and product specification.
Pneumatic cutting → The pneumatic system drives the cutting action for stable and repeatable corner processing.
Double-corner processing → Two corners can be cut at the same time to improve production efficiency and reduce repeated manual operation.
Safety-controlled operation → The air pressure regulating valve and safety shield support safer daily machine operation.
| Model | JSMRCT-1 |
| Machine Type | Air Filter Round Cutting Machine |
| Capacity | 8–10 pcs/min |
| Motor Power | 2 kW |
| Power Supply | AC 220V |
| Cutting Size | Depends on mold |
| Cutting Range | R3–R13 |
| Cutting Method | Pneumatic round corner cutting |
| Cutting Mode | Double-corner cutting |
The machine is designed for round corner processing of air filter frames or filter parts, helping produce cleaner and more consistent corner shapes.
Two corners can be cut at the same time, helping improve production efficiency and reduce repeated handling during filter frame processing.
The cutting mold can be adjusted or replaced according to different product requirements, making the machine suitable for varied round corner specifications.
The machine supports round corner cutting from R3 to R13, allowing manufacturers to match different filter frame corner designs according to mold configuration.
The pneumatic operation structure is practical for daily production, with fewer complicated control points and easier operation for routine corner cutting.
The air pressure regulating valve and safety shield help improve operating safety and support more controlled cutting during production.
To confirm whether this model fits your air filter production process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to HEPA filter production equipment and the filter cutting process. You may also compare related machines in the following categories:
Max. Width: 350 mm
Max. Coil Diameter: 1000 mm
Production Speed: 20 sheets/min or 6 m/min (based on 500 mm length)
Motor Power: 0.75 kW
Power Supply: 380V / 50Hz
Working Air Pressure: 0.6 MPa
Available Cap Diameter: ≤ Φ450 mm
Gluing Range: 10–260 g
Production Efficiency: 2–6 pcs/min
Mixing Ratio: 1:6, customizable
Machine Power: 4 kW
Working Air Pressure: 0.6 MPa
Power Supply: 380V / 50Hz
Power: 2 kW
Voltage: 380V / 50Hz
Weight: 300 kg
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success