Max. Width: 350 mm
Max. Coil Diameter: 1000 mm
Production Speed: 20 sheets/min or 6 m/min (based on 500 mm length)
Motor Power: 0.75 kW
Power Supply: 380V / 50Hz
Working Air Pressure: 0.6 MPa
The JSMRWL-350 Separated HEPA Filter Corrugating Machine is designed for corrugating separator materials used in separated HEPA filter production. It supports paper or aluminum separator processing with a maximum width of 350 mm and a maximum coil diameter of 1000 mm.
This model focuses on separator corrugating, automatic length setting, cutting, edge folding, and finished product collection. It helps manufacturers prepare stable corrugated separators for separated HEPA filter packs with better consistency and easier operation.
Material feeding → Paper or aluminum separator material is fed into the machine according to the required width, coil diameter, and production setup.
Corrugating forming → Customized rollers shape the separator material according to the required pleating height and wave pitch.
Edge folding → The aluminum edge-folding device helps support safer separator handling and reduces the risk of damaging filter media during later assembly.
Length setting and cutting → The required separator length can be set, and the machine performs automatic cutting for more consistent production.
Finished product collection → The gathering cylinder collects finished corrugated separators into the container for easier handling and the next production step.
| Model | JSMRWL-350 |
| Machine Type | Separated HEPA Filter Corrugating Machine for Paper or Aluminum |
| Max. Width | 350 mm |
| Max. Coil Diameter | 1000 mm |
| Roller Design | Customized according to pleating height and wave pitch |
| Production Speed | 20 sheets/min or 6 m/min, based on 500 mm length |
| Motor Power | 0.75 kW |
| Power Supply | 380V / 50Hz |
| Working Air Pressure | 0.6 MPa |
| Machine Weight | 600 kg |
| Machine Size | 3400 × 510 × 1600 mm |
The machine is designed for shaping paper or aluminum separator materials used in separated HEPA filter production, helping prepare stable corrugated separator structures.
The roller design can be customized according to pleating height and wave pitch, making the machine more suitable for different separated filter specifications.
Operators can set the required separator length, and the machine completes automatic cutting to improve production consistency and reduce manual operation.
The roller speed can be adjusted through the variable-speed motor to match different material conditions and production requirements.
The aluminum edge-folding device helps improve separator handling and reduces the risk of glass fiber media damage during separated HEPA filter assembly.
The gathering cylinder collects finished corrugated separators into the container, making the output process cleaner and easier to manage.
To confirm whether this model fits your separated HEPA filter production line, the following details are usually needed for machine selection or technical recommendation.
This model belongs to separated HEPA filter production equipment and the separator corrugating process. You may also compare related machines in the following categories:
Pleat Height: 50–300 mm
Max. Width of Media Roll: 650 mm
Operation Speed: 7 pleats/min
Max. Diameter of Media Roll: 600 mm
Max. Length of Filter Pack: 800 mm
Max. Width of Filter Pack: 60 mm
Model: JSMRZK-800
Capacity: 8–10 pcs/min
Glue Output: Adjustable
Motor Power: 2 kW
Power Supply: AC 220V
Hot Melt Tank Capacity: 10 L
Gluing Hose Length: 3 m
Max. Gluing Size: 800 × 800 × 100 mm
Capacity: 8–10 pcs/min
Motor Power: 2 kW
Power Supply: AC 220V
Cutting Size: Depends on mold
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success
