Applicable Cartridge Diameter: 82–152.4 mm / 3"–6"
Compatible Filter Type: 3M, Parker, Pall and Equivalent High Flow Cartridges
Cutting Cycle: Approx. 20 s / pc
Equipment Power: 2.5 kW
The JSMRJC-1 High Flow Pleated Filter Cartridge Length Cutting Machine is designed for length cutting of high flow pleated filter cartridges and large-diameter thick-pleated filter elements. It supports standard cartridge diameters from 82 mm to 152.4 mm / 3" to 6".
This model helps manufacturers achieve stable cartridge length control, cleaner cutting edges, and better end cap fitting in high flow filter cartridge production. With an approximate 20 s/pc cutting cycle, burr-free cutting result, and compact equipment structure, it is suitable for high flow cartridge production that requires accurate final length processing.
Cartridge positioning → The high flow pleated filter cartridge is positioned according to the required cutting length, cartridge diameter, and production setup.
Diameter matching → The machine is configured for standard 3"–6" cartridge diameters, with custom diameter options available when special specifications are required.
Length alignment → The cutting position is aligned to ensure the finished cartridge length matches the required end cap fitting and assembly process.
Length cutting → The machine cuts the high flow pleated cartridge with stable cutting performance and helps reduce burrs on the cartridge edge.
Finished cartridge output → After cutting, the cartridge is ready for later end cap welding, inspection, assembly, or packaging steps.
| Model | JSMRJC-1 |
| Machine Type | High Flow Pleated Filter Cartridge Length Cutting Machine |
| Cutting Application | Length Cutting for High Flow Pleated Filter Cartridges |
| Applicable Cartridge Type | Large-diameter, Thick-pleated High Flow Filter Cartridges |
| Standard Diameter Range | 82–152.4 mm / 3"–6" |
| Custom Diameter | Available upon request |
| Compatible Specifications | 3M, Parker, Pall and Equivalent High Flow Filter Cartridges |
| Cutting Cycle | Approx. 20 s / pc |
| Equipment Power | 2.5 kW |
| Power Supply | 220 V / 50 Hz |
| Overall Dimensions | 1500 × 800 × 1600 mm |
| Machine Weight | Approx. 450 kg |
The machine is purpose-built for length cutting of high flow pleated filter cartridges, helping manufacturers complete an important finishing step before end cap assembly.
It is suitable for large-diameter and thick-pleated high flow filter elements, covering common 3"–6" cartridge diameter specifications.
Stable length cutting helps maintain consistent cartridge size, which is important for later end cap fitting, welding, sealing, and final product assembly.
The cutting process helps produce a burr-free cartridge edge, reducing secondary trimming work and improving finished cartridge appearance.
The machine can be used for high flow cartridge specifications similar to 3M, Parker, Pall, and equivalent cartridge structures.
With an approximate 20 s/pc cutting cycle, this model supports stable batch processing for high flow filter cartridge manufacturers.
To confirm whether this model fits your high flow filter cartridge length cutting process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to high flow filter cartridge production equipment and also covers the filter cartridge length cutting process. You may also compare related machines in the following categories:
Heating Accuracy: ±2℃
Welding Cycle: Approx. 30 s / pc
Applicable Cartridge Type: High Flow Pleated / Large-diameter Cartridges
Welding Method: Double-Head Hot Plate Welding
Max. Filter Element Length: 40 inches
Driving System: Servo-driven Mechanism
Heating Accuracy: ±2℃
Welding Cycle: Approx. 40 s / piece
Welding Technology: Ultrasonic Edge Welding
Applicable Materials: PP, PTFE, Non-woven Fabrics
Machine Total Power: 1 kW
Power Supply: 380 V / 50 Hz
Air Supply Pressure: 0.6 MPa
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success
