Welding Technology: Ultrasonic Edge Welding
Applicable Materials: PP, PTFE, Non-woven Fabrics
Machine Total Power: 1 kW
Power Supply: 380 V / 50 Hz
Air Supply Pressure: 0.6 MPa
JSMRFS-1 High Flow Filter Cartridge Edge Ultrasonic Welding Machine
Welding Technology: Ultrasonic Edge Welding
Applicable Materials: PP, PTFE, Non-woven Fabrics
Machine Total Power: 1 kW
Power Supply: 380 V / 50 Hz
Air Supply Pressure: 0.6 MPa
The JSMRFS-1 High Flow Filter Cartridge Edge Ultrasonic Welding Machine is designed for edge welding of filter element strips used in high flow filter cartridge production. It uses ultrasonic welding technology to bond filter media edges without additional glue or mechanical stitching.
This model helps manufacturers improve edge sealing consistency, reduce adhesive-related contamination, and support cleaner high flow filter cartridge production. With 720 W ultrasonic power, 1 kW machine total power, and compatibility with PP, PTFE, and non-woven fabrics, it is suitable for filter element strip edge welding before later cartridge forming or assembly.
Material positioning → Filter element strips are positioned according to the required edge welding line, material width, and production setup.
Edge alignment → The filter media edges are aligned before welding to help maintain stable bonding and a cleaner finished seam.
Ultrasonic welding → The ultrasonic system bonds the media edges through high-frequency vibration without using glue or mechanical stitching.
Welding control → Stable ultrasonic output helps maintain consistent welding quality across repeated production.
Finished strip output → After edge welding, the filter element strip is ready for later high flow cartridge forming, middle seam welding, end cap welding, or inspection.
| Model | JSMRFS-1 |
| Machine Type | High Flow Filter Cartridge Edge Ultrasonic Welding Machine |
| Welding Application | Filter Element Strips Edge Welding |
| Welding Method | Ultrasonic Welding |
| Applicable Materials | PP, PTFE, Non-woven Fabrics |
| Ultrasonic Power | 720 W |
| Machine Total Power | 1 kW |
| Power Supply Voltage | 380 V / 50 Hz |
| Air Supply Pressure | 0.6 MPa |
The machine uses ultrasonic vibration to weld filter media edges, helping achieve clean and stable bonding without glue application.
Because the edge is welded without adhesive, the process helps reduce glue contamination and supports cleaner high flow filter cartridge production.
The machine can process PP, PTFE, non-woven fabrics, and related filter media, making it useful for different high flow cartridge material structures.
Controlled ultrasonic output helps maintain consistent edge welding results during repeated production and reduces variation caused by manual edge bonding.
The welding process helps create a neater edge structure, improving the appearance and sealing consistency of filter element strips before cartridge assembly.
With 1 kW machine total power and standard 380 V / 50 Hz power supply, this model is practical for integration into high flow filter cartridge production lines.
To confirm whether this model fits your high flow filter cartridge edge welding process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to high flow filter cartridge production equipment and also covers the filter sealing process by ultrasonic edge welding. You may also compare related machines in the following categories:
Welding Method: Double-Head Hot Plate Welding
Max. Filter Element Length: 40 inches
Driving System: Servo-driven Mechanism
Heating Accuracy: ±2℃
Welding Cycle: Approx. 40 s / piece
Max. Width: 700 mm
Adjustable Pleating Height: 3–70 mm
Pleating Speed: 0–400 pleats/min
Heating Temperature: Normal–300°C
Glue Injection Width: 10–50 mm
Processing Mode: Automatic A-side and B-side operation
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success