Ultrasonic Power: 4200 W
Welding Side Length: 10–50 mm
Welding Speed: 0–3 m/min
Applicable Materials: PP Filter Membrane, Fiberglass Filter Membrane
JSMRRS-1 High Flow Filter Middle Seam Ultrasonic Welder
Ultrasonic Power: 4200 W
Welding Side Length: 10–50 mm
Welding Speed: 0–3 m/min
Applicable Materials: PP Filter Membrane, Fiberglass Filter Membrane
The JSMRRS-1 High Flow Filter Middle Seam Ultrasonic Welder is designed for middle seam welding of high flow pleated filter elements. It uses 15 kHz ultrasonic welding technology to bond the seam without adhesive, supporting a clean, smooth, and debris-free welding appearance.
This model helps manufacturers improve seam welding consistency, reduce glue-related contamination, and support stable high flow filter cartridge production. With 4200 W ultrasonic power, 10–50 mm welding side length, and adjustable welding speed from 0 to 3 m/min, it is suitable for PP filter membrane and fiberglass filter membrane welding.
Filter element positioning → The high flow pleated filter element is positioned according to the required middle seam location, welding side length, and production setup.
Seam alignment → The middle seam area is aligned before welding to help maintain consistent bonding and smooth finished appearance.
Ultrasonic welding → The 15 kHz ultrasonic system bonds the seam by ultrasonic energy without using adhesive.
Speed adjustment → Welding speed can be adjusted from 0 to 3 m/min according to material type, seam requirement, and production rhythm.
Finished seam output → After welding, the filter element has a cleaner middle seam and is ready for later cartridge assembly, trimming, or inspection.
| Model | JSMRRS-1 |
| Machine Type | High Flow Filter Middle Seam Ultrasonic Welder |
| Welding Application | High Flow Pleated Filter Middle Seam Welding |
| Welding Method | Ultrasonic Welding |
| Ultrasonic Frequency | 15 kHz |
| Ultrasonic Power | 4200 W |
| Welding Side Length | 10–50 mm |
| Welding Speed | 0–3 m/min |
| Applicable Materials | PP Filter Membrane, Fiberglass Filter Membrane |
| Power Supply Voltage | 380 V / 50 Hz |
| Machine Total Power | 4 kW |
| Motor Total Power | 1 kW |
| Air Supply Pressure | 0.6 MPa |
The machine uses ultrasonic welding to bond the middle seam without glue, helping reduce adhesive contamination and extra post-processing work.
The 15 kHz ultrasonic frequency and 4200 W ultrasonic power support stable seam bonding for high flow pleated filter elements.
The welding process helps produce a smoother and cleaner seam appearance, reducing debris and improving finished cartridge quality.
Welding speed can be adjusted from 0 to 3 m/min, allowing operators to match different material conditions and production requirements.
The machine can weld PP filter membrane and fiberglass filter membrane, covering common material needs in high flow filter cartridge production.
Controlled ultrasonic output and adjustable welding settings help maintain repeatable middle seam quality during continuous production.
To confirm whether this model fits your high flow filter cartridge middle seam welding process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to high flow filter cartridge production equipment and also covers the filter sealing process by ultrasonic middle seam welding. You may also compare related machines in the following categories:
Unwinding Layers: 1–10 layers
Available Width: 1050 / 1250 mm
Common Layer Configurations: 3, 5, 6, 9, 10 layers
Unwinding Mode: Active or Passive Unwinding
Optional Function: Unwinding Rack Web Guiding
Heating Accuracy: ±2℃
Welding Cycle: Approx. 30 s / pc
Applicable Cartridge Type: High Flow Pleated / Large-diameter Cartridges
Applicable Cartridge Diameter: 82–152.4 mm / 3"–6"
Compatible Filter Type: 3M, Parker, Pall and Equivalent High Flow Cartridges
Cutting Cycle: Approx. 20 s / pc
Equipment Power: 2.5 kW
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success