Unwinding Layers: 1–10 layers
Available Width: 1050 / 1250 mm
Common Layer Configurations: 3, 5, 6, 9, 10 layers
Unwinding Mode: Active or Passive Unwinding
Optional Function: Unwinding Rack Web Guiding
JSMRT-10 Multi-layers Unwinder
Unwinding Layers: 1–10 layers
Available Width: 1050 / 1250 mm
Common Layer Configurations: 3, 5, 6, 9, 10 layers
Unwinding Mode: Active or Passive Unwinding
Optional Function: Unwinding Rack Web Guiding
The JSMRT-10 Multi-layers Unwinder is designed for multi-layer filter media unwinding before the pleating process in high flow filter cartridge production. It supports 1–10 unwinding layers, available widths of 1050 mm and 1250 mm, and flexible configurations for different media layer structures.
This model helps manufacturers achieve stable media feeding, smoother material delivery, and better coordination with pleating machines. With active or passive unwinding options, dance roller control, and optional web guiding, it is suitable for multi-layer filter media preparation before high flow cartridge pleating.
Media roll loading → Filter media rolls are loaded according to the required layer quantity, available width, and pleating machine configuration.
Layer configuration → The unwinding layers can be arranged from 1 to 10 layers, with common configurations including 3, 5, 6, 9, and 10 layers.
Unwinding mode selection → The machine can use active unwinding or passive unwinding according to material tension, production speed, and line requirements.
Tension and feeding control → In active mode, the inverter motor and dance roller system help maintain smoother material feeding before pleating.
Media output to pleating → The multi-layer media is delivered to the matched pleating machine for the next high flow filter cartridge production step.
| Model | JSMRT-10 |
| Machine Type | Multi-layers Unwinder |
| Function | Multi-layer filter media unwinding before pleating |
| Available Width | 1050 / 1250 mm |
| Unwinding Layers | 1–10 layers |
| Common Layer Options | 3, 5, 6, 9, 10 layers |
| Matching Equipment | Pleating Machine |
| Unwinding Mode | Active Unwinding / Passive Unwinding |
| Active Unwinding Control | Inverter Motor with Dance Roller |
| Dance Roller Type | Two Optional Types |
| Passive Unwinding Drive | Driven by Pleating Knife |
| Web Guiding | Optional |
The machine supports 1–10 layers of filter media unwinding, making it suitable for different high flow cartridge media structures and production requirements.
The available widths of 1050 mm and 1250 mm help match different pleating machine widths and support more coordinated line operation.
Active unwinding uses an inverter motor and dance roller system to help maintain smoother feeding and better tension control during continuous production.
Passive unwinding is driven by the pleating knife, providing a simpler configuration for production lines where powered unwinding is not required.
The unwinding rack can be equipped with optional web guiding to improve media alignment and reduce material deviation before pleating.
The machine provides stable multi-layer media delivery before the pleating process, helping improve production continuity in high flow filter cartridge manufacturing.
To confirm whether this model fits your high flow filter cartridge production process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to high flow filter cartridge production equipment and is mainly used for multi-layer filter media unwinding before pleating. You may also compare related machines in the following category:
Production Capacity: 3–5 pcs/min
Air Filter Length: ≤ 950 mm
Air Filter Diameter: Φ100 mm
Ultrasonic Power: 4200 W
Welding Side Length: 10–50 mm
Welding Speed: 0–3 m/min
Applicable Materials: PP Filter Membrane, Fiberglass Filter Membrane
Heating Accuracy: ±2℃
Welding Cycle: Approx. 30 s / pc
Applicable Cartridge Type: High Flow Pleated / Large-diameter Cartridges
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success