Production Capacity: 3–5 pcs/min
Air Filter Length: ≤ 950 mm
Air Filter Diameter: Φ100 mm
JSMRWS-950 Truck Air Filter Horizontal Gluing Machine
Production Capacity: 3–5 pcs/min
Air Filter Length: ≤ 950 mm
Air Filter Diameter: Φ100 mm
The JSMRWS-950 Truck Air Filter Horizontal Gluing Machine is designed for hot melt gluing on the inner and outer surfaces of heavy-duty truck air filters. It supports air filter lengths up to 950 mm, stable hot melt application, and coordinated upper and lower glue gun operation.
This model helps manufacturers improve filter paper, inner mesh, and outer mesh bonding consistency during truck air filter production. With adjustable pitch, straight or spiral gluing options, and automatic/manual operation modes, it is suitable for horizontal hot melt gluing processes that require stable filter structure and flexible production adjustment.
Filter positioning → The heavy-duty air filter is placed horizontally according to the required filter length, diameter, and gluing position.
Hot melt preparation → The 20 L hot melt applicator heats adhesive and supplies glue for continuous inner and outer surface bonding.
Glue gun movement → Upper and lower glue gun drive systems apply hot melt adhesive according to the required gluing pattern.
Pitch adjustment → The gluing pitch can be adjusted through PLC control according to different filter sizes and production requirements.
Surface bonding → Inner mesh, outer mesh, and filter paper are bonded by hot melt to help maintain a stable filter structure during later assembly and use.
| Model | JSMRWS-950 |
| Machine Type | Truck Air Filter Horizontal Gluing Machine |
| Function | Hot melt gluing for inner and outer surfaces of truck air filters |
| Production Capacity | 3–5 pcs/min |
| Air Filter Length | ≤ 950 mm |
| Air Filter Diameter | Φ100 mm |
| Main Machine Power Supply | 220V / 50Hz |
| Working Air Pressure | 0.6 MPa |
| Hot Melt Applicator Power Supply | 380V / 50Hz |
| Hot Melt Applicator Capacity | 20 L |
| Hot Melt Applicator Power | 6 kW |
The machine is designed for hot melt gluing on both inner and outer surfaces of heavy-duty air filters, supporting stable bonding during truck filter production.
Separate upper and lower glue gun drive systems help coordinate adhesive application on different filter surfaces and improve gluing consistency.
Hot melt adhesive helps bond the inner mesh, outer mesh, and filter paper together, supporting a firmer filter element structure during production.
Proper hot melt gluing helps reduce gaps between pleats under pressure, supporting more stable filter performance after assembly.
The gluing pitch can be adjusted according to filter size through the PLC computer control system, making the machine suitable for different specifications.
Hot melt adhesive can be applied in straight or spiral forms, giving manufacturers more flexibility for different truck air filter structures.
The inner and outer circle can be glued together or controlled independently through electrical adjustment, supporting more flexible production settings.
To confirm whether this model fits your truck air filter horizontal gluing process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to truck filter production equipment and also covers the filter hot melt gluing process. You may also compare related machines in the following categories:
Available Cap Diameter: ≤ Φ450 mm
Gluing Range (Single): 10–260 g
Product Efficiency: 2–6 pcs/min
Mixing Rate: 1:6, customizable
Unwinding Layers: 1–10 layers
Available Width: 1050 / 1250 mm
Common Layer Configurations: 3, 5, 6, 9, 10 layers
Unwinding Mode: Active or Passive Unwinding
Optional Function: Unwinding Rack Web Guiding
Ultrasonic Power: 4200 W
Welding Side Length: 10–50 mm
Welding Speed: 0–3 m/min
Applicable Materials: PP Filter Membrane, Fiberglass Filter Membrane
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success