Product Capacity: 15 pcs/min
Crimping Height: 1000 mm
Roll Diameter: Φ80–350 mm
Steel Plate Thickness: 0.3–1.2 mm
JSMRAT-1000 Truck Air Filter Mesh Cutting & Rolling Machine
Product Capacity: 15 pcs/min
Crimping Height: 1000 mm
Roll Diameter: Φ80–350 mm
Steel Plate Thickness: 0.3–1.2 mm
The JSMRAT-1000 Truck Air Filter Mesh Cutting & Rolling Machine is designed for cutting and rolling inner and outer mesh used in truck air filter production. It can process steel plate material with 0.3–1.2 mm thickness and form rolled mesh with a diameter range of Φ80–350 mm.
This model helps manufacturers improve mesh processing efficiency, reduce manual cutting and rolling variation, and support more consistent round mesh forming. With automatic cutting, adjustable rolling size, and smooth cutting performance, it is suitable for continuous truck air filter mesh preparation before later filter element assembly.
Mesh material feeding → Steel plate or mesh material is fed into the machine according to the required filter height, roll diameter, and production setup.
Size adjustment → The cutting and rolling size is adjusted according to different truck air filter inner mesh or outer mesh specifications.
Mesh cutting → The machine cuts the mesh material smoothly to prepare the required length and shape for rolling.
Rolling forming → The cut mesh is rolled into a round shape within the required diameter range for truck air filter production.
Finished mesh output → The formed mesh is prepared for later filter element assembly, and excess material can also be rolled for easier handling.
| Model | JSMRAT-1000 |
| Machine Type | Truck Air Filter Mesh Cutting & Rolling Machine |
| Function | Inner and outer mesh cutting and rolling |
| Product Capacity | 15 pcs/min |
| Crimping Height | 1000 mm |
| Roll Diameter | Φ80–350 mm |
| Steel Plate Thickness | 0.3–1.2 mm |
| Motor Power | 1.5 kW |
| Power Supply | 380V / 50Hz |
| Machine Weight | 700 kg |
| Machine Size | 2260 × 1800 × 1780 mm |
The machine can automatically cut and roll mesh material into round shapes, helping improve production efficiency and reduce manual processing variation.
This model is suitable for processing both inner mesh and outer mesh used in truck air filters, supporting key mesh preparation steps before filter assembly.
The machine can be adjusted according to different filter height and roll diameter requirements, making it suitable for more than one truck air filter specification.
The rolling process helps form mesh material into round shapes with better consistency, supporting more stable later assembly of truck air filter elements.
The machine is designed to provide smooth cutting performance, helping improve mesh edge quality and reduce unnecessary finishing work.
Excess waste material can also be rolled round, making material handling cleaner and more convenient during continuous mesh processing.
To confirm whether this model fits your truck air filter mesh processing process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to truck filter production equipment and also covers the filter mesh cutting and forming process. You may also compare related machines in the following categories:
Product Capacity: 25 pcs/min
Filter Paper Height: ≤ 100 mm
Hot Melt Applicator Capacity: 10 kg
Hot Melt Applicator Heat Power: 6 kW
Hot Melt Machine Capacity: 10 kg
Heating Power: 6 kW
Air Pressure: 0.6 MPa
Supply Voltage: 380V / 50Hz
Roll Diameter: Φ80–500 mm
Product Capacity: 10–20 pcs/min
Diamond Mesh Width: 109 mm
Steel Plate Thickness: 0.25–0.4 mm
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success