Product Capacity: 25 pcs/min
Filter Paper Height: ≤ 100 mm
Hot Melt Applicator Capacity: 10 kg
Hot Melt Applicator Heat Power: 6 kW
Air Filter Paper to Paper Hotmelt Clipping Machine
Product Capacity: 25 pcs/min
Filter Paper Height: ≤ 100 mm
Hot Melt Applicator Capacity: 10 kg
Hot Melt Applicator Heat Power: 6 kW
The Air Filter Paper to Paper Hotmelt Clipping Machine is designed for hot melt bonding and clipping of filter paper in truck air filter production. It helps connect filter paper sections with stable adhesive application, consistent bonding strength, and efficient paper-to-paper joining.
This model is suitable for continuous truck air filter paper assembly processes that require reliable hot melt supply and clean clipping performance. With 25 pcs/min product capacity, 10 kg hot melt applicator capacity, and standard 380V / 50Hz power supply, it supports stable daily production for filter manufacturers.
Filter paper positioning → Filter paper sections are placed according to the required paper height, bonding position, and truck air filter production setup.
Hot melt preparation → The 10 kg hot melt applicator heats adhesive to the proper working condition for continuous glue supply.
Paper-to-paper bonding → Hot melt adhesive is applied to connect filter paper sections and support stable bonding between paper ends.
Clipping operation → The machine completes paper-to-paper hotmelt clipping to help maintain the joined paper structure during later processing.
Continuous output → Finished joined filter paper sections are prepared for the next truck air filter assembly or forming process.
| Machine Type | Air Filter Paper to Paper Hotmelt Clipping Machine |
| Function | Hot melt bonding and clipping of filter paper sections |
| Product Capacity | 25 pcs/min |
| Filter Paper Height | ≤ 100 mm |
| Hot Melt Applicator Capacity | 10 kg |
| Hot Melt Applicator Heat Power | 6 kW |
| Working Air Pressure | 0.6 MPa |
| Power Supply | 380V / 50Hz |
| Machine Weight | 450 kg |
| Machine Size | 1865 × 806 × 2037 mm |
The machine is designed for joining filter paper sections through hot melt bonding and clipping, helping complete an important paper connection step in truck air filter production.
The 10 kg hot melt applicator and 6 kW heating power support stable adhesive melting and continuous glue supply during routine production.
Controlled hot melt application helps improve bonding consistency between filter paper sections and reduces variation caused by manual joining.
The machine supports filter paper heights up to 100 mm, making it suitable for corresponding truck air filter paper joining requirements.
With a product capacity of 25 pcs/min, this model helps support stable production rhythm in truck air filter manufacturing workshops.
The standard 380V / 50Hz power supply, 0.6 MPa working air pressure, and 450 kg machine structure make it suitable for daily industrial filter production use.
To confirm whether this model fits your truck air filter paper joining process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to truck filter production equipment and is mainly used for paper-to-paper hotmelt clipping in truck air filter manufacturing. You may also compare related machines in the following category:
Capacity: 8 pcs/min
Air Pressure: 0.6 MPa
Power: 220V / 50Hz
Product Max Width: 600 mm / 800 mm / 1000 mm
Product Capacity: 15 pcs/min
Crimping Height: 1000 mm
Roll Diameter: Φ80–350 mm
Steel Plate Thickness: 0.3–1.2 mm
Hot Melt Machine Capacity: 10 kg
Heating Power: 6 kW
Air Pressure: 0.6 MPa
Supply Voltage: 380V / 50Hz
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success