Test Flow: 5–50 L/min
Flow Precision: Grade 1
Pressure Precision: Grade 0.5
JSMRCY-200 Oil/Fuel Filter Performance Tester
Test Flow: 5–50 L/min
Flow Precision: Grade 1
Pressure Precision: Grade 0.5
The JSMRCY-200 Oil/Fuel Filter Performance Tester is designed for comprehensive performance testing of oil and fuel filters. It supports 5–50 L/min test flow, Grade 1 flow precision, Grade 0.5 pressure precision, and normal temperature to 100°C temperature control.
This model helps manufacturers evaluate filter flow resistance, differential pressure, bypass valve response, blocking life, high-pressure resistance loss, and high-temperature oil resistance. With stainless steel test pipelines, precise flow and pressure measurement, impurity mixing support, and a structured test system, it is suitable for laboratory testing, product development, and routine quality control.
Filter installation → The oil or fuel filter is installed into the test fixture according to the required filter type, test flow, and performance verification standard.
Flow and temperature setup → The operator sets the required flow range, oil temperature condition, and test sequence based on the filter performance test plan.
Flow and pressure measurement → The tester measures test flow and inlet/outlet pressure to evaluate flow resistance and differential pressure performance.
Bypass and blocking test support → The system can support bypass valve response testing and blocking life evaluation with impurity mixing when required.
Result checking → Test data and observed performance are used to verify filter quality, compare product designs, or support routine quality inspection before delivery.
| Model | JSMRCY-200 |
| Machine Type | Oil/Fuel Filter Performance Tester |
| Function | Comprehensive performance testing for oil and fuel filters |
| Test Flow | 5–50 L/min |
| Flow Precision | Grade 1 |
| Pressure Precision | Grade 0.5 |
| Temperature Control | Normal Temperature–100°C |
| Oil Tank | Stainless steel, 50 L |
| Motor Power | 3.7 kW |
| Power Supply | 380V / 50Hz |
| Machine Weight | 500 kg |
| Machine Size | 2000 × 1100 × 1885 mm / 600 × 575 × 1620 mm |
| Applicable Standards | JB/T 6725-93, ISO 4548 |
The tester supports flow and differential pressure testing, bypass element performance testing, bypass valve response pressure testing, blocking life testing, high-pressure resistance loss testing, and high-temperature oil resistance testing.
The system uses a high-precision ellipse gear flow meter to measure test flow, helping improve the consistency of oil and fuel filter performance evaluation.
A precise pressure gauge is used to measure inlet and outlet pressure, supporting differential pressure analysis and flow resistance comparison between filter samples.
The working table, main test pipelines, and related couplers use stainless steel or rust-preventive materials, helping improve durability and reduce contamination risk during testing.
The impurity mixing system supports blocking life testing, making the tester suitable for evaluating how filter performance changes under contamination loading conditions.
The main test pipeline layout is designed to avoid flow dead zones, helping improve repeatability, testing consistency, and daily laboratory operation reliability.
To confirm whether this model fits your oil or fuel filter performance testing process, the following details are usually needed for machine selection or technical recommendation.
This model belongs to automated filter testing equipment and also covers the filter performance testing process. You may also compare related machines in the following categories:
Oil Pump Flow: 32 L/min
Test Pressure: 0–2 MPa, adjustable
Pressure Precision: Grade 1
Maximum Pressure: 0.2 MPa
Maximum Diameter: Φ100 mm
Maximum Length: 350 mm
Test Accuracy: 0.01 mm
Test Range: 0.01–4 mm
Quick response within 24 hours
Expert advice tailored to your needs
End-to-end support for your success